Epson XP 4100 Driver

Epson XP 4100 printer drivers are responsible for printing and performing other basic functions. Apart from the built-in driver that gets installed on your computer upon connecting the printer, there is also an additional file/package. Tap the button below to download the Full Feature Epson XP 4100 Software package. Run it and follow the upcoming instructions to install the driver. Updating the driver keeps the printer run smooth.

Epson XP 4100 Driver Download
Epson XP 4100 Driver

Epson XP 4100 Manual

The printer’s parts are explained and then the Wi-Fi networking and all other features are clearly explained. This Epson XP 4100 Manual covers the entire features & functionality of the printer letting the users get a complete knowledge of the printer and its usage. With illustrations provided, every procedure is described in simple terms. Download and save the Epson XP 4100 setup printer manual to a specific and easily accessible location on your computer.

Epson XP 4100 Manual

Epson XP 4100 Unboxing & First Time Setup

Epson Printer setup isn’t a Herculean task. With the right directions, it is an easy procedure. We have put down the process instructions to offer an uncomplicated printer setup experience, even to the first-time printer users.

  • Unpack the printer package and remove the protective materials.
  • Pull open the scanner unit until it locks into place.
  • Attach the power cord to the rear of the printer and then its other end to a wall outlet.
  • Lift the control panel to switch on the Epson XP 4100 setup printer.
  • Use the arrow buttons to select the language.
  • Shake the ink cartridges well before unwrapping.
  • Remove the yellow tapes off and push them into their corresponding colored holders.
  • Press OK to begin charging the printer’s ink delivery system.
  • After a waiting time of 6 minutes, a completion message appears on the screen.
  • Adjust the print quality of the printer as per the on-screen instructions.
  • Move the feeder guard forward, elevate the paper support, and tilt it slightly towards the back.
  • Push the edge guides all the way out to the extreme ends.
  • Place the paper with the printable side up and the short edge going first into the feeder.
  • Adjust the guides against the paper.
  • Extend the output tray and proceed as per the on-screen instructions.
  • Insert the CD-ROM for driver installation and run the file in it.
  • Establish the required connection and complete the Epson XP 4100 setup process.

Epson XP 4100 Wireless Setup

  • Turn on the printer and the router.
  • Press the Home button the printer’s control panel.
  • Tap the Wireless icon for Epson xp 4100 wireless setup.
  • On the screen that appears, select Wi-Fi > Start Setup / Change Settings > Wi-Fi Setup Wizard.
  • You should see a list of networks with yours enlisted too.
  • Select your network using the arrow button and hit OK.
  • Or enter the network name manually using the displayed keyboard.
  • Click the Enter Password field and then type the password.
  • Verify the displayed network settings and select Start Epson XP 4100 setup.
  • Pick Print Check Report to receive the network setup report.
  • Exit the Home button.
  • The Wi-Fi icon is shown on the LCD screen, indicating a successful Epson xp 4100 wireless setup connection.

Epson XP 4100 Mobile Printing

  • Connect the printer to a wireless network as described in the above section.
  • Make sure that you connect the mobile device to the same wireless network.
  • Open the application on the phone and go to the page to be printed.
  • Touch Share menu > Print.
  • Choose the printer and configure the printer settings for Epson xp 4100 mobile printing.

If you prefer to use the Epson Print & Scan app, proceed as follows:

  • Create a connection between the printer and the local wireless network.
  • Download Epson Print and Scan app from the Microsoft Windows Store for Epson xp 4100 mobile printing.
  • Connect the Windows device to the same wireless network.
  • On the app, select your Epson printer.
  • Epson XP 4100 setup printer is now ready to print photos.

How to Print Photos on Epson XP 4100

  • Install the ePrint app on your iPhone.
  • Connect the printer and the iPhone to the same wireless network.
  • Get to know your printer’s IP address.
  • Head to Setup > Network Settings > Confirm Network Setup.
  • You can find the IP address in the list of details on the screen.
  • Note it down.
  • Launch the ePrint app on your mobile device.
  • Tap Add a Printer on the main screen.
  • Enter the printer’s IP address and touch Add.
  • Choose Albums and pick the photos to be printed. Tap Next.
  • Hit Print Settings > Select Media > Done > Normal > Paper Size > Print.
  • The printer starts printing the photos upon agreeing to its final request on Epson XP 4100 setup printer.
Epson XP 4100 Scanning

Epson XP 4100 Scanning

Scanning can be performed from the printer’s control panel and the computer. Install Epson Scan 2 on your computer, configure the scan settings, and proceed to scan. You get to choose the destination to which the scanned file is to be saved. Also, you can now save the scan output in the desired format.

Epson XP 4100 Scan To Computer

  • Open the document cover and place the original document with the face down on the scanner glass.
  • Press the Home button and select Scan.
  • Choose Computer on the next screen.
  • If your computer is linked to the printer over a wireless network, pick it from the displayed list.
  • Or select USB Connection and proceed for Epson xp 4100 scanning.
  • Tap Save as PDF.
  • Customize the scan settings and press Start.

Epson XP 4100 Scan To Cloud

  • Make sure your printer is registered to the Epson Connect account.
  • Note down your printer’s email address and password for Epson xp 4100 scanning.
  • Log in to the Epson Connect account with the above credentials.
  • Choose your printer > Scan to Cloud > Destination List > Add.
  • Create a destination list.
  • Keep the original to be scanned facing down on the scanner glass.
  • Tap the Home button on the screen and select Scan.
  • Choose Cloud as the destination.
  • Touch Scan and change any of the displayed settings.
  • Change the settings within the Advanced Settings category on Epson XP 4100 setup printer.
  • Press Start to perform Epson xp 4100 scanning.

Epson XP 4100 Ink Replacement

  • Keep the replacement cartridges handy before installing.
  • Switch on the printer and see if you get any messages on the expended cartridges.
  • If Yes, note the cartridges to be replaced and follow the on-screen instructions.
  • If the replacement is voluntary, select Maintenance > Ink Cartridge Replacement > Next > Start.
  • Lift and keep the scanner unit in a slanting position.
  • Hold the tabs on the cartridges and remove them.
  • Shake the new cartridge before unpacking if it is a black one.
  • Other colored cartridges need not be shaken.
  • Strip off the yellow tape from the cartridge and place it in the corresponding slot.
  • Lift the scanner unit up and then lower it a bit.
  • Elevate the scanner unit again and completely shut it down.
  • Upon selecting Completed on the LCD screen, the print head moves to the home position.

Epson XP 4100 Troubleshooting

Maintaining the Epson XP 4100 setup printer well contributes to better print quality and speed. Troubleshoot the errors and issues as soon as possible to increase the longevity of the printer. Software issues can be handled by changing the function configuration or driver updates. Clean the printer often to clear paper jams. Network problems can be easily solved by power cycling the devices involved. Below are some of the frequent Epson xp 4100 troubleshooting errors and their fixes.

Epson XP 4100 Not Connecting Wireless

  • If a wireless connection is to be established via the WPS option, make sure you select the WPS option on the printer’s control panel within 2 minutes of pressing the WPS button on your printer.
  • See if the printer has been placed within the range of the router.
  • Remove microwave and cordless devices in the way of the Epson XP 4100 setup printer and the router.
  • Check if the router is working properly by connecting to other devices.
  • Locate the cause of the problem on the network connection report to fix Epson xp 4100 not connecting wireless.
  • It is suggested to temporarily disable the Firewall and other anti-virus software on your router.
  • Power cycle the router by disconnecting it from the power outlet and then connecting it back.
  • If the router doesn’t broadcast the network name, enter it manually to fix Epson xp 4100 troubleshooting.
  • Check if the entered credentials are correct (they are case-sensitive).
  • Know that the Wi-Fi Direct password keeps changing every time it disconnects.
  • So keep it updated and enter right credentials to avoid Epson xp 4100 not connecting wireless.

Epson XP 4100 Not Printing

  • See if the printer is turned on and connected to the computer.
  • Secure the cable tightly at both ends of the devices to solve Epson xp 4100 troubleshooting.
  • It is highly suggested that you connect the printer directly to your computer instead of a hub to solve Epson xp 4100 not printing.
  • Detach the USB cable from the computer, right-click the printer and select Remove Device.
  • Reconnect the USB cable to the computer and print a test page.
  • Confirm that the printer status is not offline or pending.
  • Try printing at a lower resolution to fix Epson xp 4100 not printing.
  • Select your printer as the default printer on your Windows computer.
  • Delete all print jobs in the Print Queue of Epson XP 4100 setup printer.
Setup Epson Printer