This Wide-Format all-in-one Epson Workforce WF 7710 printer delivers print-shop-quality borderless prints of the size 13" x19". It is an inkjet printer with a 250-sheet tray. Exclusively for specialty papers, a rear feed slot is added in the printer. This machine supports 2-sided print, scan, and fax. The printer's ADF can accommodate up to 35 pages. To facilitate easy navigation and control, the 4.3" touchscreen is colored.
Epson WF 7710 Driver
The Epson WF 7710 driver is a compilation of all the files required to use your Epson WF 7710 printer either wired or wirelessly. It includes the Epson WF 7710 Driver, Epson WF 7710 Scanner Driver & Epson Scan Utility, Epson Event Manager, Fax Utility, ReadyInk Agent, and Software Updater. Separate files are available for different Operating Systems. The driver is necessary for the initial epson wf 7710 setup process. Also, to troubleshoot certain printer problems, the Epson WF 7710 driver file has to be installed on the computer.
Epson WF 7710 Manual
The Epson Workforce WF 7710 printer's basics parts are explained in the Epson WF 7710 manual with illustrations. Right from loading paper to configuring print settings, every procedure in using the Epson WF 7710 printer has been described. Separate sections for printing, copying, and scanning with detailed instructions are included. Finally, the very important aspect of machine usage, the troubleshooting, is also added at the end. This Epson WF 7710 Manual facilitates the users to solve the printer issues themselves.
Epson WF 7710 Unboxing
The Epson Workforce WF 7710 unboxing process involves the unpacking and setup of the Epson Printer. It essentially includes the powering up the printer and establishing the necessary connections. The accessories that come with the printer have to be stored for later purposes. Go through the manual before heading to set it up yourself.
Epson WF 7710 Setup
Discard the packaging materials and lift the printer out of the carton.
Attach each end of the power cord to the wall outlet and then to the printer's rear.
Lift the control panel and power on the printer.
Choose your language, country, and time.
Reach for the ink cartridge area below the scanner unit.
It is advised to shake the cartridges before uncovering them.
Remember to remove the yellow tapes out of them.
Place the cartridges in their corresponding holders and close the Epson Workforce WF 7710 printer lid.
A completion message appears on the Epson WF 7710 Setup printer indicating the charging of ink.
Now, move over to the paper cassette. Adjust the slides and load paper into it.
Pull out the output tray and set the paper print settings on the control panel.
Printing can begin once the Epson WF 7710 driver is installed.
Epson WF 7710 Scanner Driver
The Epson WF 7710 scanner driver for the Epson WF 7710 setup printer is the Epson Scan 2 Utility. The Epson Scan OCR Component creates searchable PDFs with Epson Scan and Document Capture Pro feature. The scanned document is converted to several other formats with this software. This file has been designed to be compatible with all Operating Systems.
Epson WF 7710 Scan to Computer
Ensure that the Epson WF 7710 scanner driver is installed on your computer.
Link the Epson Workforce WF 7710 printer to your computer over a wireless network.
Move the ADF edge guides outward and place your original document in it.
Choose Scan and pick the destination as Computer.
The proceeding directions take you through the scanning process.
Configure the scan settings on the scan software on the computer.
Epson WF 7710 Scan to Email
Place the original document on the printer for scanning.
On the Home screen, select Scan Email.
Pick an Email address from the Contacts list.
Select Keyboard and use it to input the recipient mail address. Press OK.
To choose a recently used mail address, click History.
Pick the File Format within the Scan Settings.
Make the necessary changes to the Subject and File Name Settings.
Save the set scan settings with the Presets option.
Hit Send. The scanned file is sent via the email.
How to Load 11x17 Paper in Epson WF 7710
The printer must not be scanning, printing, or copying while loading paper.
Draw out the paper cassette and move its guides to the extreme ends to Load 11x17 Paper in Epson WF 7710.
Adjust the front edge guide to your paper size.
With the printable side facing down, load the paper in the cassette to Load 11x17 Paper in Epson WF 7710.
Hold the paper in place with the guides and insert it back into its position.
If the paper is to be loaded in the rear paper feed slot, slide the guides and feed the paper.
On Settings windows, choose Rear Paper Feed Slot as the Source.
How to Change Ink Cartridge on Epson WF 7710
Switch on the Epson Workforce WF 7710 printer and press OK if you get a message about the expended cartridge to Change Ink Cartridge on Epson WF 7710.
Or select Maintenance Ink Cartridge Replacement Start.
Access the scanner unit and squeeze the cartridge tabs to take them out.
Shake the new ink cartridge package well before use.
Unwrap the cartridge and pull out its yellow tape to Change Ink Cartridge on Epson WF 7710.
Place the new cartridge in its holder and click it well into position.
Push the Start button and wait for the printer to begin charging ink.
Epson WF 7710 Troubleshooting
Fairly common Epson WF 7710 Troubleshooting problems include printer offline issue, poor quality printing, and not responding to the commands. These issues can be easily solved with quick solutions. With little to no printer knowledge, you can now troubleshoot your printer issues. Go on and read the most common errors and their fixes.
Epson WF 7710 Not Recognizing Replacement Cartridges
Note down the ink cartridge that's not recognized.
Try clicking them well into their positions.
Pull down the printer's lid and press the Ink button.
Inspect the chips of all the cartridges one by one, wipe them, and then fit them back in.
Take out all the cartridges and power down the printer.
Upon turning on, insert only the faulty cartridge and see if it is being recognized.
Clean the chip contacts since they might store dust and debris.
Make sure that the cartridge wires are not bent or damaged.
Epson WF 7710 Paper Jam
If required, cancel the print job.
Look for any jammed paper in the rear paper feed slot.
Open the scanner unit and remove the paper within.
Take the paper cassette out and carefully discard the torn pieces of paper from it.
Tuck the paper cassette back into the Epson Workforce WF 7710 printer and follow the on-screen prompts to clear any Epson WF 7710 Troubleshooting errors.
The rear cover can be opened by pressing the tabs.
Remove the duplexer and find the jammed paper bits in it.
After removing them all, install the duplexer back in its place.
Epson WF 7710 Won't Print
Never run more than three cleaning cycles in your Epson Workforce WF 7710 printer.
Remember to turn off the printer every night to solve Epson WF 7710 Troubleshooting.
Full-color pages should be printed at least once a week.
It is recommended to use only the genuine Epson ink cartridges.
You can find two sponges below the resting printheads.
Saturate these sponges with water using a syringe.
Leave the printer sit overnight before turning it on to solve >Epson WF 7710 Won't Print.
Epson WF 7710 Not Printing
Head to Settings Control Panel Devices and Printers> Manage Printers.
Right-click the printer and select the See What's Printing option.
Remove the checkmark off the Use Printer Off-line option.
See that the printer has a steady network connection.
Set the proper paper size settings in the printer application to fix Epson WF 7710 Troubleshooting.
Inspect if any of the Epson Workforce WF 7710 nozzles are clogged with a print head nozzle check.
