Home
Epson WF 3620

Get Simple Epson Workforce WF 3620 Printer Guide

Reflecting a huge development in printer technology, this inkjet Epson Workforce WF 3620 printer delivers results better than the laser printers. It produces fast, best-quality color prints, laser-sharp text. Saves up printing cost and time. Includes wireless and Wi-Fi direct technology to enable remote printing. With an automatic 2-sided duplexer and document feeder, its speed remains incomparable.

Epson WF 3620 Driver

The Epson WF 3620 printer driver can be downloaded from the Internet for free of cost. Be it the initial setup or method of fixing a printer issue, a driver is necessary. Epson WF 3620 Driver is solely responsible for interpreting the computer commands to the printer. Apart from aiding in the setup epson WF 3620 process, a driver also helps in configuring print, scan, and fax settings.

Epson WF 3620 Manual

The printer manual is a booklet with illustrations on how to set up the machine and perform Epson Workforce WF 3620 printer functions. Download the online Epson WF 3620 Manual. Epson WF 3620 Manual opens in PDF form. Head to the Contents page and click directly at the information you are looking for. You’ll be taken to the corresponding page. You can also find troubleshooting methods for common printer errors on Epson WF 3620 Manual.

Epson WF 3620 Unboxing

Can’t contain the excitement of setting up your new Epson Workforce WF 3620 printer? It is no tough task, yet can be a little confusing if you’re someone who doesn’t deal with printers often. Unboxing the printer should be done with great care and caution. Keep aside the Epson printer accessories and proceed to power up the printer. Configure the print settings on the control panel.

Setup Epson WF 3620

Offload the printer from its carton and discard the blue tapes.
Insert the power cord into the printer and then plug it int the wall outlet.
Push the Power button on the printer to turn it on.
Set the language, region, and time on the printer.
Open the printer’s lid in a way to see the ink cartridge area.
Unwrap the ink cartridges and take away the yellow tags in them.
Install the cartridges into the corresponding holders. Close the lid.
Touch Installed and begin feeding plain paper into the paper feeder.
Insert the cassette into the printer and touch OK on the screen.
Link the computer to the printer with a Wi-Fi network.
You can begin printing after installing the required driver on your printer.

Epson WF 3620 Wireless Setup

Ensure that the printer is turned on and is free of any cable connections.

On the printer, press the Home button Wireless icon for Epson WF 3620 Wireless Setup.

Choose Wi-Fi Start Setup or Change Settings Wi-Fi Setup Wizard.

Find your wireless network from the list and click it.

A keypad appears on the Epson Workforce WF 3620 printer’s screen. Use it to enter the network name manually if your network is not enlisted.

Touch the Password field and enter the network password accurately for Epson WF 3620 Wireless Setup.

Hit OK. Save the network settings by clicking Start Setup.

Epson WF 3620 Scanner

Epson WF 3620 printer has a color flatbed/Automatic 2-sided Automatic Document Feeder scanner. The photoelectric device used is Color CIS line sensor which provides a maximum hardware resolution of 2400dpi. The scan output will be at 1200 X 2400 dpi. The maximum interpolated resolution is at 9600 dpi. The input scanner bit depth is 48, and the output is 24 bit. The output can be scanned to PC, Cloud, Email, and memory devices.

Epson WF 3620 Scan to Computer

Download and install the complete EPSON Scan Utility Driver Package on your computer for Epson WF 3620 Scan to Computer.
Ensure that the original is not creased or crumbled.
Push the Epson Workforce WF 3620 ADF edge guide outward and load even surfaced papers into the feeder on Epson WF 3620 Scanner.
Enable the 2- sided setting and choose the paper type.
Select Home Scan Scan To Computer to perform Epson WF 3620 Scan to Computer.
The scanned image output is saved to the specified location of the computer.
Save the scan settings by selecting the Preset option using Epson WF 3620 Scan to Computer guide.

Epson WF 3620 AirPrint

Open the app page to be printed on your iOS device.
Tap the app’s Share icon or the Menu option.
Touch Print. If you’re unable to find the option, refer to the app’s guide.
Choose Select Printer Your printer.
Configure the number of copies and other such print details in the settings.
Locate the print button in the top-right corner. Hit it to print for Epson WF 3620 AirPrint.

Epson WF 3620 Ink Replacement

Get hold of the replacement cartridges before removing the old cartridges.
The printer automatically detects expended cartridges and notifies you of them.
Or select Maintenance Ink cartridge replacement Next Start if you’re voluntarily replacing the cartridges on Epson Workforce WF 3620 printer.
Lift the scanner unit. Pinch the sides of the tabs on the cartridge to take it out.
Due to stable storage, the ink might be solidified. Hence, shake it gently before installing.
Locate the yellow tape in it and remove it. Load the cartridge into the corresponding holder.
Perform the same procedure for all the colored cartridges.
Touch Completed and wait for the ink charging confirmation message on the screen.

Epson WF 3620 Troubleshooting

Identify the cause of the Epson WF 3620 Troubleshooting problem and fix it with the easy steps provided below. The problem recognition has been made easy with the error codes displayed. Tried and tested solutions are available for every error the printer is prone to encounter. Common printer issues might occur in the ink supply system, print head, wireless connection.

Epson WF 3620 Error Code 0x97

Turn on your Epson Workforce WF 3620 printer. Then Restart your computer.
Log in as the administrator to solve Epson WF 3620 Error Code 0x97.
Click Start All Programs Accessories Tools System Restore.
Hit Next after selecting Restore my machine to an earlier date.
Pick a restoration date and click Next to fix Epson WF 3620 Error Code 0x97.
As soon as the restoration process is over, reboot your computer.
Now, try printing with your printer.

Epson WF 3620 Error 0x9a

Check for any internal debris within the carriage area and remove them.
Lift the printer’s lid and try to move the carriage to solve Epson WF 3620 Troubleshooting.
Use compressed air to blow out the debris from the inside compartment.
See that there are no obstructions on either side of the compartment.
Wipe the encoder strip with a clean, dry cloth to solve Epson WF 3620 Error 0x9a.
Pull out the printer cable and reconnect it after 5 minutes.
Restart the printer and see if the Epson WF 3620 Error 0x9a still exists.

Epson WF 3620 Printer Offline

Turn off the printer, pull out the attached cables, and then reconnect the cables to fix Epson WF 3620 Troubleshooting. Restart your computer and try printing again.
Hit Setup System Administration Restore Default Settings Yes on the printer’s control panel.
Access Start Control Panel System and Security > Windows Firewall.
Disable Firewall security since that might be restricting the router’s access. Type Epson Event Manager in the Windows search box to solve Epson WF 3620 Printer Offline.
Click the application, right-click, and uninstall it.
Download the latest version and install it. Begin printing.

Epson WF 3620 Error Code 0xe5

Clean the encoder strip with a dry cotton cloth.
Check if there is any paper jammed in the roller.
Place the printer’s belt firmly into its position to solve Epson WF 3620 Error Code 0xe5.
Make sure that the printer driver is installed properly.
Unplug the Epson Workforce WF 3620 printer’s power cable from the wall outlet.
After about 5 minutes, press down the Power button for a minute to solve Epson WF 3620 Error Code 0xe5.
Release it and then plug in the cable back. The Power button must be pressed down while plugging back the cable.
Run the print head clean cycle twice to fix this Epson WF 3620 Troubleshooting error.

Epson WF 3620 Won’t Connect to Wi-Fi

Try connecting your other devices to the router and check the network’s signal strength.
Keep the printer always within the range of the router to avoid Epson WF 3620 Won’t Connect to Wi-Fi issue.
Remove cordless phones and large metal objects in the signal path of the printer.
Check if there are any access restrictions on the router and disable them while solving Epson WF 3620 Troubleshooting.
Print a Network Status Sheet on your printer to note down its MAC address to solve Epson WF 3620 Won’t Connect to Wi-Fi.
Add the Epson Workforce WF 3620 printer’s MAC address to the router.
Try entering your network name if it isn’t automatically enlisted.
Double check that the entered password is correct.

Epson WF 3620 Black Ink Not Printing

Check if the printer displays any errors. Follow the on-screen prompts to fix these issues.
Press the Home button Setup Maintenance.
Select the Printhead Nozzle Check. View the printed page with four colored grids.
Hit Done if there are no gaps in the page or choose Clean the printhead if there are faint lines.
Take care not to turn off the machine when the printer runs the cleaning cycle.
Open the printer’s lid such that you see the printhead assembly to solve Epson WF 3620 Black Ink Not Printing.
Release the printhead latch and slide the assembly to the right to solve Epson WF 3620 Troubleshooting.
Saturate the sponges in the carriage area with distilled water.
Print eight pages of text and images until the output comes clean.

Epson WF 3620 Reset

Press the Home button. Pick Setup System Administration.
Key in the administrator password if requested for Epson WF 3620 Troubleshooting.
Navigate down and select Restore Default Settings.
Choose any of the following options: Wi-Fi Settings, Copy Settings, Scan Settings, and Fax Settings.
The option Clear All Data and Settings resets all control panel settings and contacts for Epson WF 3620 Reset.
Select Yes to reset all the configured settings for Epson WF 3620 Reset.
A soft reset would be to press the Pause/Reset button on the Epson Workforce WF 3620 printer’s control panel for about 3 seconds.
This clears any stuck print job. Repeat the process if the error still persists.