Epson WF 2650 Driver

The Combo Package Installer is a one-file compilation of all the required software to print either wired or wirelessly. The Epson WF 2650 driver and scan utility are involved in basic printer functions while the Event Manager, ReadyInk Agent, and Epson WF 2650 Driver Software Updater take up the responsibility of the routine printer functions. Download the Epson WF 2650 driver below for the initial Epson WF 2650 Setup process.  

Epson WF 2650 Manual

This Epson WF 2650 manual, crafted in layman’s terms gives a clear insight into the printer’s features and functions. Make the fullest use of this Epson Workforce WF 2650 printer with the knowledge of all its attributes. It begins with basic procedures such as loading paper and goes on to explain the troubleshooting methods. For the convenience of the users, this Epson WF 2650 manual is available in PDF format. Download and save it to your computer. 

Epson WF 2650 Manual

Epson WF 2650 Unboxing

The Epson WF 2650 printer unboxing process can be intimidating if you’re new to printers. We understand the excitement and the confusion that follows the purchase of a brand new printer. Epson printers are easy to set up. Their LCD screens take you through a very straightforward tour of the entire procedure. The printer can be connected to your computer with a cable or over a network. Read below to learn the processes of Epson WF 2650 Setup and all things afterward.

epson wf 2650 setup

Epson WF 2650 Setup

  • Place the printer on a flat surface close to a wall socket.
  • Plug one end of the power cord into the rear of the printer.
  • Insert its other end into the power socket for Epson WF 2650 Setup.
  • Press the Power button on the Epson Workforce WF 2650 printer to turn it on.
  • On the next screen, select the language, country, and time.
  • Take out the new cartridges only when you’re ready to install them.
  • Pull out the yellow tapes in them and load into the corresponding holders.
  • Extend the paper cassette out of the printer.
  • Adjust the guides and feed paper into it. Push it back to its original position.
  • Connect a phone cable to the telephone wall jack and the LINE port of your Epson WF 2650 Setup printer.
  • You can begin printing once the printer driver is installed.

Epson WF 2650 Wi-Fi Setup

  • Turn on your printer and router.
  • Check if the router’s wireless signal is stable and strong.
  • On the printer’s screen, scroll down to select Epson WF 2650 Wi-Fi setup Wi-Fi Setup Wizard.
  • Pick the name of your wireless network and press OK.
  • If the network is not on the list, enter the name manually on the printer’s keypad.
  • Input the network’s password on the next screen.
  • Since the network name and password are case sensitive, take extra care while entering them for Epson WF 2650 Wi-Fi Setup.
  • The network settings are displayed. Tap OK to save them.
  • Print a network setup report and hit Start.  

Change Ink Cartridge Epson WF 2650

  • Accept to change the cartridges if the printer notifies you of the expended cartridge.
  • If you voluntarily want to change the cartridge, select Maintenance Ink Cartridge Replacement.
  • Press Start and open the scanner unit.
  • Pinch the sides of the empty cartridge and lift it out.
  • Shake the cartridge well before installing.
  • Install them in the matching colored holders after removing the yellow tapes.
  • Push the Color button to ensure that the cartridges are installed correctly.
  • Close the Epson Workforce WF 2650 scanner unit and wait for a few minutes.
  • Once the ink charging is done, proceed to print.

Epson WF 2650 Scan to Email

  • Make sure you have a preconfigured email server before you proceed.
  • Check if the date and time are set correctly for the time stamps.
  • Place the original document on the scanner glass for scanning.
  • On the home screen, select Scan, And on the next screen, choose email.
  • Pick a Contact from the Contacts list, or enter the recipient’s mail address with the displayed keyboard.
  • Configure the Epson Workforce WF 2650 scan settings such as File Format and resolution.
  • Modify the Subject and File Name settings if necessary.
  • Save the settings with the preset option and hit Send. 

Epson WF 2650 Scan to Computer

  • Make sure the scan utility is installed on the computer to perform Epson WF 2650 Scan to Computer.
  • Connect the printer to the computer or a wireless network.
  • Scroll down the Menu to Scan OK.
  • Pick Computer as the destination and touch Proceed.
  • Select the USB connection as the method of connection if your printer is wired to the computer.
  • Choose the computer name on the printer if it is connected wirelessly for Epson WF 2650 Scan to Computer.
  • Begin scanning with the Color button.

Epson WF 2650 Troubleshooting

The printer might encounter setup, network, copying, scanning, and paper problems. These Epson WF 2650 Troubleshooting issues can be easily fixed. Below given are some of the common printer issues and their troubleshooting methods.

Epson WF 2650 Ink Cartridge Not Recognized 

  • You can change the ink cartridges even before they are empty if this sign shows up.
  • The wrong cartridges can cause this error. Hence, use only original cartridges.
  • Check if the ink cartridges have installed in the correct slots.
  • Restart the printer to clear this issue.
  • Once the error is gone, install the new cartridges one by one.
  • The one cartridge which when installed shows up the error is the faulty one.
  • Clean the contact chip and then load the cartridge. 

Epson WF 2650 Won’t Print Black

  • Power cycle your Epson Workforce WF 2650 printer and try printing.
  • Print a test page and find the cartridge causing this issue.
  • Replace the particular cartridge alone and then check.
  • Replace cartridges that are too low on ink.
  • See that the cartridges are installed correctly in their slots.
  • Use a pin to clean the clogged printheads for Epson WF 2650 Troubleshooting.
  • Double check if the yellow tape from the cartridge has been removed.

Epson WF 2650 Wi-Fi Problem 

  • Confirm that the router is working by connecting it to other devices to solve Epson WF 2650 Wi-Fi Problem.
  • Keep the printer within the range of your Epson Workforce WF 2650 printer.
  • Ensure that there aren’t any restrictions set on the wireless router.
  • Enter the network name manually if it is not enlisted.
  • Check if the password has been input correctly.
  • See that the TCP/IP settings are configured properly to avoid Epson WF 2650 Troubleshooting.
  • Try connecting to a different port on the router to fix Epson WF 2650 Wi-Fi Problem.

Epson WF 2650 Communication Error

  • Switch off the printer and check the power cord connections.
  • Plug another device into the power outlet to check if it is working to solve Epson WF 2650 Communication Error.
  • Check if the interface cable is intact with both the devices.
  • Clear the errors if there are lights other than the Power light flashing.
  • See the nozzle check pattern to find if the printer is broken.
  • Set your printer as the default device in the printer software.
  • Reduce the image resolution of your document for memory clearance to solve Epson WF 2650 Communication Error.

Epson WF 2650 Printing Blank Pages

  • Go through the settings configured and see that the correct size settings are input.
  • Locate the clogged nozzles with the print head nozzle check.
  • On your printer software, set your printer as the default one.
  • Select Skip Blank Page setting in your printer software to solve Epson WF 2650 Printing Blank Pages.
  • Head to Control Panel Hardware and Sound Devices and Printers.
  • Right-click the printer and choose Printing Preferences.
  • Click Maintenance Extended Settings Skip Blank Page OK.

Epson WF 2650 Won’t Scan

  • Use the USB cable that came with the printer.
  • It is advised to connect the printer directly to the computer instead of a USB hub for Epson WF 2650 Troubleshooting.
  • Change the mode if your computer is in Standby or Sleep mode to solve Epson WF 2650 Won’t Scan.
  • Update the driver file if your computer’s OS has been upgraded.
  • Use the Mac OS X interface instead of the Mac OS X Classic mode.
  • Secure the interface cable at both devices tightly into the correct ports.
  • Launch the correct scan software on your computer to fix Epson WF 2650 Won’t Scan.
  • Keep the documents at least 0.8 inches from each other on Epson Workforce WF 2650 printer.
Setup Epson Printer